Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service Reset on a Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

This brief video tutorial shows all the necessary steps to reset the service light, which indicates the remaining life of the engine oil, on a first-generation Citroen C3. This operation is very simple and can be done independently after servicing the vehicle.

First, press and hold the "ODO" button on the right side of the speedometer, then turn on the vehicle's instrument panel and wait, keeping the button pressed, for the countdown on the display to reach zero.

Finally, switch off and restart the vehicle to verify the reset.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Citroen C3 (2009-2016 / SC) Resetting the service light on Citroen vehicles is a very simple and quick operation to perform independently; today we will take the Citroen C3 mode…
Citroen C3 (2016-2023 / SY, SX) Today, you will see how to reset the service light on the 2018 Citroen C3. Turn on the instrument panel and wait for the lights to appear on the disp…
Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos