Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the internal ceiling light bulbs of the Citroen C3.

Model: Citroen C3 SC - Years 2009-2016
Part: Interior dome light bulb

Below we will see the steps that will allow us to disassemble and replace the bulbs of the interior ceiling lights of the Citroen C3. First, we get into the car and start by levering on the side of the plastic ceiling light, using a thin lever, to detach it and remove it from the roof lining; then we disconnect the electrical connector that we find underneath, thus also removing the bulb holder, as shown in the video. At this point, we remove and replace the small bulb with the new one, whether they are the sidelights or the central ceiling light; then we reassemble everything!

Posted on 1 November 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C3
Replacing Front Headlight Bulb on Citroen C3
Citroen C3 (2002-2009 / FN, FC) Replace the blown bulbs in the front headlight of a Citroen C3. Open the front bonnet and secure it. Remove the plastic cover to access the front hea…
Replacement of the rear light bulbs of the Citroen C3
Replacement of the rear light bulbs of the Citroen C3
Citroen C3 (2016-2023 / SX, SY) Today in this guide, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Citroen C3. First …
How to replace the third brake light bulb on the Citroen C3
How to replace the third brake light bulb on the Citroen C3
Citroen C3 (2009-2016 / SC) The replacement of the third brake light of the Citroen C3 is a very simple operation that can be carried out independently thanks to our short video…

How to Remove the Oil Filter on a Toyota Yaris

How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack. After removing the cover panel (if present), use a socket spanner to unscrew the oil filter holder. Allow the oil to drain into a container for disposal. Remove the dirty and worn filter from the metal container; clean the container and insert a new filter. Screw the filter holder back into its designated housing using the appropriate spanner and lower the car once the job is complete.

Watch the video!


by ScegliAuto

More videos