Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulbs in the Rear Light of a Citroen C3

Model: Citroen C3 SY, SX - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start removing the side trim, then disconnect the electrical connector of the bulbs; now unscrew the plastic screw of the light to remove it from the outside, as shown in the video.

At this point, detach the bulb holder from the housing, giving you access to all the bulbs in the rear light; replace any faulty bulbs with new ones, and reassemble the rear light!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

Replacing Rear Headlight Bulbs on a Citroen C3
Replacing Rear Headlight Bulbs on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to remove and replace the rear headlight bulbs on a Citroen C3 by following these simple instructions. First, op…
How to Change the Rear Light Bulb on a Citroen C3
How to Change the Rear Light Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) Do you want to replace the bulb of the rear light? Let’s see how to remove the rear light of the Citroen C3. Lift the boot lid, then remove the fabri…
How to Replace the Rear Light Bulbs on the Citroen C3
How to Replace the Rear Light Bulbs on the Citroen C3
Citroen C3 (2009-2016 / SC) Below are the instructions for removing the rear light and replacing its bulbs on the Citroen C3. First, open the boot lid and start removing the cov…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos