Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Change the rear light bulb on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Rear light bulb
Operation: Change the rear light bulb on Citroen C3

Do we want to replace the rear light bulb? Let's see how the rear light of the Citroen C3 is removed. We lift the bonnet of the luggage compartment, then, we remove the cloth cap placed on the side of the side trim. Unscrew the rear light tightening nuts (unscrew any other screws on the light), disconnect the power supply terminals connected to the light and pull it away from its seat. We replace damaged bulbs with new ones (same voltage) on hand. We mount the headlight with the respective tightening nuts. We turn on the instrument panel and test the operation of the new bulbs.


Posted on 5 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - How many reversing lights does the Citroen C3 have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos