Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulbs on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light bulb

In today's video, you will learn how to remove and replace the rear headlight bulbs on a Citroen C3 by following these simple instructions. First, open the boot and remove the plastic caps found on the sides of the lights; then unscrew the screws underneath using a 10 mm spanner. At this point, remove the side cover of the boot and disconnect the electrical connector; then extract the light unit from the outside. Finally, open the side tabs to remove the bulb holder along with the bulbs; press and twist to extract and replace them, as shown in the video!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…
How to Replace the Rear Light of a Citroën C3
How to Replace the Rear Light of a Citroën C3
Citroen C3 (2009-2016 / SC) Follow this guide to replace the rear light of a Citroën C3 along with the bulbs. Open the boot lid, unscrew the securing nuts at the back of the rea…
How to Remove the Rear Light of the Citroen C3
How to Remove the Rear Light of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today's video will show you the procedure for removing and replacing the rear light and its bulbs on the Citroen C3. First, open the boot and begin t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos