Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of a Citroën C3

Model: Citroen C3 SC - Years 2009-2016
Part: Tail light

Follow this guide to replace the rear light of a Citroën C3 along with the bulbs. Open the boot lid, unscrew the securing nuts at the back of the rear light (inside the boot); prepare to detach the rear light (as shown in the video). Disconnect the bulb holders from the light and replace the damaged bulbs with new ones (voltage and size must match the original bulbs). Finally, reassemble the rear light: screw in the securing nuts of the light (as previously unscrewed). Test the correct operation of the previously installed bulbs.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Light Bulb on a Citroen C3
How to Change the Rear Light Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) Do you want to replace the bulb of the rear light? Let’s see how to remove the rear light of the Citroen C3. Lift the boot lid, then remove the fabri…
Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…
How to Remove the Rear Light Fitted on a Citroen C3
How to Remove the Rear Light Fitted on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the rear light fitted on a Citroen C3? Open the boot lid, remove the retaining nut (located at the side of the boot) with a screwdr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos