Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Tail light bulb

Below we will see the instructions for disassembling the rear light and replacing its bulbs on the Citroen C3. First, open the rear hatch of the trunk and start removing the cover located behind the headlight; then unscrew the two plastic screws and disconnect the electrical connector to remove it, as shown in the video. At this point, separate the light fixture from the lamp holder, accessing all the bulbs of the rear light; replace any faulty bulbs with new ones, with the same fitting, finally reassemble the rear light!

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…
How to replace the rear headlight bulb of the Citroen C3
How to replace the rear headlight bulb of the Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the rear headlight bulb of the Citroen C3 is a simple and quick operation to be carried out independently. To perform the replacement of th…
How to Replace the Headlight Bulbs on a Citroen C3
How to Replace the Headlight Bulbs on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let’s see how to replace the bulbs fitted in the front headlight of a Citroen C3. Open the front bonnet and (pulling the lever located at the bottom …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos