Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Nemo
  6. : How to reset the service light on a Citroen Nemo?

Citroen Nemo - Video tutorial

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Checks and maintenance
Operation: How to reset the service light on a Citroen Nemo?

The reset of the service light on the Citroen Nemo follows a very simple procedure that can be done independently. Let's begin the reset by turning on the vehicle's instrument panel and then fully pressing the accelerator pedal. We continue the reset by pressing the brake pedal seven times while keeping the accelerator pedal pressed. After pressing the brake pedal the indicated number of times, we release the accelerator pedal and press it again for sixty seconds. We conclude the reset by turning off the instrument panel and restarting it to verify that the reset has been successfully performed.


Posted on 13 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos