Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the accelerator pedal of the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Accelerator

If the accelerator pedal of your Citroen Berlingo first series is having problems and you want to disassemble it yourself, then all you have to do is read the following guide and follow all the steps described. First of all, enter the passenger compartment and make sure the vehicle is turned off, then remove the entire plastic panel located below the steering wheel. Once you have done this, also remove the second protective panel and unscrew the two screws located on the sides of the accelerator pedal with a suitable key. Finally, disconnect the electrical connector from the pedal and you are done.

Posted on 9 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fan resistors on Citroen Berlingo MK2
Replacement of the fan resistors on Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see what the problem is with the cabin fan that only works at maximum speed on a Citroen Berlingo (or Peugeot Partner); if the…
How to Reset the Service on a Citroen Berlingo?
How to Reset the Service on a Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) Resetting the service on a Citroen Berlingo is a very simple and quick operation. First, ensure you have completed all required scheduled maintenance…
How to Replace the Clutch Cable on a Citroen Berlingo
How to Replace the Clutch Cable on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, you will discover the main instructions on how to disassemble and replace the clutch cable on a Citroen Berlingo. First, open the driv…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos