Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for a 2010 Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Programming the key for a car, in this case, the 2010 Citroen Berlingo, but applicable to any other vehicle, is best done by specialised centres equipped for this type of work. The process is quite simple, as shown in the video posted here.

Connect a code reader to the vehicle's OBD port via cable, then configure the vehicle model, read the code to be copied, and finally, copy this code into the transponder of the new key, also known as the Slave key.


Posted on 15 August 2026 by ScegliAuto


Related tutorials

How do you program the key of the Citroën Berlingo?
How do you program the key of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To program the key of the Citroën Berlingo, you need to insert the blank key into the ignition block: once it has been inserted, you can connect a di…
How to Turn Off the Service Light in the Citroen Berlingo?
How to Turn Off the Service Light in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) For all owners of the Citroen Berlingo, as shown in the video above, let's understand how to reset the service light, which is the automatic reminder…
How to Reset the Tyre Warning Light on a Citroen Berlingo
How to Reset the Tyre Warning Light on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) There is a DIY procedure for resetting the tyre warning light on a Citroen Berlingo, for which we have a video presentation for those who are not cle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos