Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Headlamp on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Headlight

Today’s steps will show you how to remove and replace the front headlamp unit on a Citroen Berlingo, following the instructions below. First, open the bonnet of the vehicle and begin unscrewing the fixing screws located at the top of the headlamp. You will need to remove the bumper on the side to access the lower screw by unscrewing the wheel arch screws and those located under the bumper, as illustrated in the video. At this point, disconnect the electrical connector for the bulbs to remove the headlamp unit and replace it with the new one!

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
How to remove the headlight of the Citroen Berlingo
How to remove the headlight of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today we will explain how to remove the right front headlight of the Citroen Berlingo. This operation can be easily performed independently. To remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos