Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs on the Citroen Berlingo 2

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Headlight bulb

In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. First, open the bonnet and remove the plastic protection cap of the dipped beam bulb; disconnect the electrical connector and unclip the metal spring to remove and replace it. Next, remove the cover of the position bulb and extract the bulb holder to replace it; finally, see how to remove and replace the bulbs of the indicators!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Replace Dipped Beam on Citroen Berlingo
Replace Dipped Beam on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) This guide explains what to do when the headlight bulbs are blown. Replace the bulbs of the headlight on a Citroen Berlingo. Lift the front cover, an…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos