Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Light on the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

In this guide, we will see the instructions to remove and replace the front indicator light on the Citroen Berlingo. First, open the vehicle's bonnet and disconnect the electrical connector of the light located behind it. Then, unscrew the fixing screws to remove the indicator light, as shown in the video.

At this point, replace just the bulb or the entire unit if damaged; then reassemble the light and reconnect the electrical connection, checking that the light works!


Posted on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Citroen Berlingo
How to Replace the Rear Light Bulb on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replacing the rear light bulb on a Citroen Berlingo follows a very simple procedure. Start by opening the tailgate, then remove the screw located at …
Replacing the Rear Light of a Citroen Berlingo
Replacing the Rear Light of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Is the light on your car broken and needs replacing? Let's look at removing the rear light of a Citroen Berlingo. Open and lift the tailgate of the l…
Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos