Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulb on a Citroen Berlingo follows a very simple procedure. Start by opening the tailgate, then remove the screw located at the centre of the seal that secures the light.

Once the screw is removed, you can pull the light out. To replace the bulb, disconnect the connector by first releasing the upper part, then the lower part, and then pull it out. Proceed by removing the old bulb and inserting a new one. Reconnect the connector and close the cover, then insert the light back into its housing and secure it with the screw.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Replacing the Fog Light Bulb of the Citroen Berlingo MK3
Replacing the Fog Light Bulb of the Citroen Berlingo MK3
Citroen Berlingo (2018-2026 / MK 3) If the front fog light bulb of the Citroen Berlingo blows, follow these steps to replace it and ensure safe driving. Position yourself in front of th…
How to replace the headlight bulb of the Citroen Berlingo
How to replace the headlight bulb of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) If one of the bulbs in the front headlight of your Citroen Berlingo has stopped working and you want to find out how to replace it safely and correct…
How to Replace the Front Headlamp Bulb on a Citroen Berlingo
How to Replace the Front Headlamp Bulb on a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) To replace the front headlamp bulb on a Citroen Berlingo, park the vehicle, switch off the engine, and open the bonnet. Locate the rear of the optica…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos