Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear optical group bulb of a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Light bulb

In this video we can see how easy it is to change the rear light bulb of a Citroen Berlingo (or a Peugeot Partner); so easy that the youtuber showing us is only nine years old! The only tool we need is a hex key, with which we will have to unscrew the two screws located at the top and side of the headlight. Once these are removed, we can pull the headlight towards us, and disconnect the electrical connector located at the back. The part containing the bulbs is connected to the transparent part through clips, which detach easily. We replace the burnt out bulb - remembering never to touch the bulb with bare hands - and then put the plate with the bulbs back in place. We screw the headlight unit back in place, and it's done. Easy, right?

Posted on 29 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Front Headlamp on a Citroen Berlingo
Guide to Replacing the Front Headlamp on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today’s steps will show you how to remove and replace the front headlamp unit on a Citroen Berlingo, following the instructions below. First, open th…
Replacing the Third Brake Light on the Citroen Berlingo/Peugeot Partner
Replacing the Third Brake Light on the Citroen Berlingo/Peugeot Partner
Citroen Berlingo (2008-2018 / MK 2) The third brake light on the Citroen Berlingo/Peugeot Partner is easily accessible. Open the tailgate and locate the plastic cover on the top of the …
How to Replace the Rear Light Bulb on a Citroën Berlingo
How to Replace the Rear Light Bulb on a Citroën Berlingo
Citroen Berlingo (1996-2013 / MK 1) To replace the rear light bulb on a Citroën Berlingo, open the rear tailgate to locate the small knob next to the light. By loosening this small knob…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos