Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp from the Citroen Berlingo/Peugeot Partner

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

To remove the headlamp unit from the Citroen Berlingo/Peugeot Partner, you need to unscrew several anchoring points: a hex screw on side 1; a Torx screw on the same side; another Torx screw at the top. At the bottom, you will find a hidden bolt that is quite tricky to unscrew.

In addition to the screws, the headlamp is secured by clips and plastic tabs, which you must handle carefully to avoid breaking them.

Remember to disconnect the main connector (for the main/dipped beam) and the indicator connector. The indicator is a separate piece that attaches to the main headlamp body: press the tab and then pull out the headlamp unit.

In the indicator unit, there are two bulbs, one larger and one smaller, while in the main headlamp, there is a rubber cap that protects the bulb held by a metal clip.


Posted on 29 September 2026 by ScegliAuto


Related tutorials

Citroen Berlingo (2008-2018 / MK 2) The following steps will show you how to remove and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First…
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show you the steps to remove and replace the door panel on a Citroen Berlingo, as well as on a Peugeot Partner. First, open the fr…
Citroen Berlingo (1996-2013 / MK 1) Today's steps will show you how to remove and refit the front door panel and window mechanism on the Citroen Berlingo, as well as the Peugeot Partner…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos