Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the plastic covers of the fog light bulbs of the 2019 Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Body

Today we will explain how to remove the protective mask of the front fog light bulb on a 2019 Citroen Berlingo. To perform this operation, you need to use a plastic removal tool to insert it into the upper corner of the mask. Once the tool is inserted, you will need to apply force from the inside out until the mask is completely removed. After removing the mask, you can replace the bulb if necessary or perform other maintenance. To reassemble, simply place the mask inside the hole and push it inward.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Turn On the Fog Lights on the Citroen Berlingo
How to Turn On the Fog Lights on the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this video tutorial, you will learn how to turn on and off the bulbs of the front fog lights, as well as the rear fog light, on the Citroen Berlin…
Where are the fuses of the Citroën Berlingo located?
Citroen Berlingo (2018-2026 / MK 3) Every fuse in the Citroën Berlingo is located inside one of the special fuse boxes that are installed on the vehicle: in this type of vehicle it will…
Where are the fuses located in the Citroën Berlingo?
Where are the fuses located in the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) The fuse boxes of the Citroën Berlingo are responsible for containing the fuses that regulate the operation of the devices installed inside the vehic…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos