Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Instrument Cluster of the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Instrument cluster

Replace the instrument cluster of the Citroen Berlingo. Remove the side plastics around the instrument cluster before taking it out. Use a lever to detach the plastic trim of the instrument cluster (without breaking the plastics) and pull it away from the dashboard. Unscrew the securing screws of the instrument cluster, disconnect the power connectors of the instrument cluster. After removing the instrument cluster from the dashboard, prepare to install the new instrument cluster (repair the instrument cluster if necessary). Connect the electrical connectors and refit the covering plastics over the instrument cluster.

Updated on 21 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Resetting the service light on the Citroen Berlingo
Resetting the service light on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Shortly, we will see how to reset the service light and maintenance key of the Citroen Berlingo. First, we get into the vehicle and start pressing an…
How to Reset the Service Interval on the Citroen Berlingo
How to Reset the Service Interval on the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) On the Citroen Berlingo, the maintenance interval reset is performed with the engine off. With the Citroen Berlingo stationary, press and hold the "0…
How do you reset the Service light on the Citroën Berlingo?
How do you reset the Service light on the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) The Service indicator that appears on the instrument panel of the Citroën Berlingo can be reset by turning on the instrument panel and holding down t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos