Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs on Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Headlight bulb

Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted behind the light). Disconnect the power connector and remove the blown bulbs. Replace them with new bulbs (same size and voltage). Refit the headlight cover and then lower the front bonnet. Test the bulbs by entering the vehicle and turning on the car lights using the control lever. Replace all the bulbs in the Berlingo.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Lights on Peugeot Berlingo
Replacing Front Headlight Lights on Peugeot Berlingo
Citroen Berlingo (1996-2013 / MK 1) Remove the damaged bulbs from inside the front headlight of a Peugeot Berlingo. Open and lift the front bonnet. Remove the plastic cover at the back …
Replacement of the front headlight bulbs of the Citroen Berlingo
Replacement of the front headlight bulbs of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's steps will show us how to disassemble and replace the headlight bulb of the Citroen Berlingo. First, we open the car's hood and start by remo…
How to Replace the Front Light Bulbs on a Citroen Berlingo
How to Replace the Front Light Bulbs on a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Do you want to change the front light bulbs on a Citroen Berlingo and don’t know how to proceed with the disassembly? Let’s see how to do it in this …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos