Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Citroen Berlingo - Peugeot Partner

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Door trim panel

Today's guide will show you the steps to remove and replace the door panel on a Citroen Berlingo, as well as on a Peugeot Partner. First, open the front door and start by removing the plastic cover of the grab handle using a thin lever; then unscrew the screws found underneath, as shown in the video. At this point, pry on the sides of the panel to detach and remove it, disconnecting the handle cable; all that's left is to reassemble the door panel, following the video tutorial to the end!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door and start removing the plastic cover of the opening.. …
How to disassemble and reassemble the door panel of the Citroen Berlingo - Peugeot Partner Tepee
How to disassemble and reassemble the door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) .. mechanism of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door of the vehicle and start by removing the plastic.. …
How to remove the door panel of the Citroen Berlingo
How to remove the door panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) .. panel of the Citroen Berlingo, as well as the Peugeot Partner. First, we open the front door of the vehicle and start by removing the plastic cover.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos