Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

This guide illustrates the procedure for removing and replacing the door panel of the Citroen Berlingo, as well as the Peugeot Partner. First, open the front door of the vehicle and start by removing the plastic cover of the grab handle; then, unscrew all the fixing screws located underneath and on the sides of the panel, as shown in the video.

At this point, disconnect the opening handle cable, permanently removing the door panel; replace it with a new one if necessary, applying the reverse procedure!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Removing Door Panel from Citroen Berlingo
Removing Door Panel from Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Remove the door panel from the Citroen Berlingo. Let's see how to detach the cover panel. Remove the trim from the internal handle and the frame of t…
Replacing the Door Panel on a Citroen Berlingo
Replacing the Door Panel on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Remove the door panel on a Citroen Berlingo if you need to work inside or replace it. Remove the cover plastics from the door opening handle, then un…
Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) The following steps will show you how to remove and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos