Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Door trim panel

The following steps will show us how to disassemble and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door and start removing the plastic cover of the opening handle; then we unscrew the fixing screws that we find underneath, as shown in the video. At this point, we lever on the sides of the panel to detach it and remove it, disconnecting the handle cable; in this way it will be possible to access the internal components of the door panel, finally reassembling everything!

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and reassemble the door panel of the Citroen Berlingo - Peugeot Partner Tepee
How to disassemble and reassemble the door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) .. mechanism of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door of the vehicle and start by removing the plastic.. …
How to Remove the Door Panel on a Citroen Berlingo - Peugeot Partner
How to Remove the Door Panel on a Citroen Berlingo - Peugeot Partner
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show you the steps to remove and replace the door panel on a Citroen Berlingo, as well as on a Peugeot Partner. First, open the fr…
Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. external fuses of the Citroen Berlingo and the Peugeot Partner Tepee. First, open the bonnet of the vehicle and locate the fuse box, situated at the.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos