Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulb of the Citroen Berlingo MK3

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

If the front fog light bulb of the Citroen Berlingo blows, follow these steps to replace it and ensure safe driving. Position yourself in front of the headlamp containing the burnt bulb, and using a screwdriver as a lever, remove the plastic trim surrounding the fog light.

With a Torx screwdriver, unscrew the two screws securing the fog light and pull it out. Disconnect the electrical connector, grip the bulb holder, and twist it to remove. Replace the burnt bulb.

Insert and secure the bulb holder, reconnect the connector, reposition the headlamp, and secure and fit the trim.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to remove the plastic covers of the fog light bulbs of the 2019 Citroen Berlingo
How to remove the plastic covers of the fog light bulbs of the 2019 Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) Today we will explain how to remove the protective mask of the front fog light bulb on a 2019 Citroen Berlingo. To perform this operation, you need t…
How to Replace the Rear Light Bulb on a Citroen Berlingo
How to Replace the Rear Light Bulb on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replacing the rear light bulb on a Citroen Berlingo follows a very simple procedure. Start by opening the tailgate, then remove the screw located at …
How to Replace the Rear Light Bulb on a Citroën Berlingo?
How to Replace the Rear Light Bulb on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) You can replace the rear light bulb on a Citroën Berlingo by opening the tailgate to locate the bulb next to the light in question. This must be free…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos