Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3
  6. : How to replace the front and rear turn signal bulbs of the Citroen C3.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Headlight bulb
Operation: How to replace the front and rear turn signal bulbs of the Citroen C3.

Today's steps will show us how to disassemble and replace the front and rear headlight bulbs of the Citroen C3. First, we open the engine hood and start by removing the bulb holder along with the bulb, disconnecting it and replacing it with the new one, as shown in the video. At this point, we open the rear door and unscrew the plastic screws of the headlight, disconnecting the electrical connector to remove it. We separate the bulb holder from the light fixture to access all the bulbs, replacing the indicator bulb, and finally reassemble the rear light!


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos