Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Dashboard of a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Dashboard

See other generations:
Video tutorial

On the dashboard of this car model, there is a small storage compartment concealed by a specific flap that integrates well with the dashboard itself; it happens that due to heat, the covering applied to the flap tends to come unstuck; to remedy this situation, you must re-glue the covering, but it is advisable to remove it first: once the flap is opened, remove the plastic strip at the bottom of the storage compartment that conceals the fixing screws, unscrew the screws and remove the flap complete with covering; apply upholstery glue to both surfaces, wait for it to dry, and then press the two parts together; once the gluing is complete, reassemble the flap.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) In this short and simple guide, you will see the main steps to repair the glove compartment of the Citroen C4 Grand Picasso, as well as the C4 Picass…
Citroen C4 Picasso (2006-2013 / MK 1) Follow this guide to repair the electronic handbrake button on the Citroen C4 Grand Picasso. First, get inside the vehicle and remove the plastic cov…
Citroen C4 Picasso (2006-2013 / MK 1) This video demonstrates how to temporarily fix the air conditioning lever mechanism of a Citroen C4 Picasso MK1. The issue is located in the passenge…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos