Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Citroen Jumper?

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Fuse box

The fuse box in the cabin of the Citroen Jumper is located on the passenger side. To access the fuses, we open the glove compartment, remove any items inside, and find a small door at the beginning of the compartment. To remove the door, we insert a flathead screwdriver at the bottom of the door to lift it up. Once the door is lifted, we find the cabin fuses. To replace a fuse, we identify it based on the faulty component, grab it with our hands or small pliers, pull it out, and check if the bridge inside is broken - if it is, the fuse needs to be replaced. If the bridge inside is intact, the fuse is still working. Replace a fuse with one of the same amperage.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where are the fuses in the Citroën Jumper?
Where are the fuses in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) In the Citroën Jumper, all the fuses are divided within the appropriate fuse boxes located on the vehicle: there are four in this type of vehicle. Th…
Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses in the Citroën Jumper are contained within the appropriate fuse boxes installed in the vehicle: in this type of vehicle, you can find two b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos