Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Lodgy
    4. : Fuse box

Dacia Lodgy - Fuse box

Dacia Lodgy (2012-2022 / MK 1)
Where is the fuse for the headlights of the Dacia Lodgy located?
When the headlights or a single headlight of the Dacia Lodgy stop working, it is possible that the cause is the malfunction of the corresponding fuse. In these …read all…
Posted on 24 March 2024 by ScegliAuto
Dacia Lodgy (2012-2022 / MK 1)
Where are the fuses located in the Dacia Lodgy?
Any fuse of the Dacia Lodgy is installed inside one of the appropriate fuse boxes that are present inside the vehicle: in this type of vehicle it is possible …read all…
Posted on 13 March 2024 by ScegliAuto
Dacia Lodgy (2012-2022 / MK 1)
Where are the fuses located in the Dacia Lodgy?
The fuses of the Dacia Lodgy are located inside the appropriate fuse boxes that are present in the vehicle: in this type of vehicle, it is possible to identify …read all…
Posted on 29 October 2023 by ScegliAuto
Car stereo (1) Key (1) -board computer (2) Checks and maintenance (7) Air filter (1) Cabin air filter (1) Diesel filter (2) Oil filter (1) Headlight bulb (2) Dashboard light (1) Engine oil (1) Brake pads (2) Instrument cluster (4) Fuse box (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos