Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Lodgy
    4. : Instrument cluster

Dacia Lodgy - Instrument cluster

Dacia Lodgy (2012-2022 / MK 1)
To reset the tire pressure warning light on the Dacia Lodgy.
To manually reset the TPMS light when it turns on even though there is no puncture on your Dacia Lodgy, all you have to do is follow the procedure described in …read all…
Posted on 2 October 2023 by ScegliAuto
Dacia Lodgy (2012-2022 / MK 1)
How to reset the service on a Dacia Lodgy.
After replacing the engine oil and oil filter on this car model, we need to reset the service light that has come on in the instrument panel. In the following …read all…
Posted on 21 June 2023 by ScegliAuto
Dacia Lodgy (2012-2022 / MK 1)
How to reset the service on the Dacia Dokker
If we have carried out the engine oil and relative filter replacement on this car in do-it-yourself mode, we must then proceed to reset the service warning …read all…
Posted on 27 May 2023 by ScegliAuto
Dacia Lodgy (2012-2022 / MK 1)
How to change the picture on Dacia Lodgy
We see the disassembly of the instrument panel on a Dacia Lodgy. We unscrew the screw placed under the covering plastic and remove it (under the steering …read all…
Posted on 5 January 2024 by ScegliAuto
Car stereo (1) Key (1) -board computer (2) Checks and maintenance (7) Air filter (1) Cabin air filter (1) Diesel filter (2) Oil filter (1) Headlight bulb (2) Dashboard light (1) Engine oil (1) Brake pads (2) Instrument cluster (4) Fuse box (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos