Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : EGR valve

Dacia Sandero - EGR valve

EGR Valve Dacia Sandero (2012-2020 / b 8)

Dacia Sandero (2012-2020 / B8)
How to Replace the EGR Valve on a Dacia Sandero II
Replacing the EGR valve on the Sandero II 1.5 dCi requires the removal of several components. Lift the car and place it on axle stands. Disconnect the MAF …Read all…
Posted on 3 August 2026 by ScegliAuto
Accelerator (1) Airbag (4) Speaker (3) Shocks (1) Antenna (2) Air conditioning (1) Car stereo (24) Roof rack bars (7) Battery (11) Ignition coil (1) Air vents (1) Transmission (3) Spark plugs (4) Glow plugs (1) Body (9) Control unit (1) Key (17) Trunk lock (1) Timing belt (10) V-belt (1) Onboard computer (17) Checks and maintenance (55) Dashboard (3) Brake rotors (1) Side marker light (1) Headlight (8) Tail light (4) Air filter (20) Cabin air filter (28) Diesel fuel filter (6) Oil filter (5) Parking brake (4) Fuel injectors (1) Accessory kit (4) Light bulb (12) Side marker bulb (1) Headlight bulb (28) Tail light bulb (11) Interior dome light bulb (2) Instrument panel light (1) License plate light (3) (5) Rear window (1) Handle (1) Engine (1) Transmission fluid (2) Engine oil (6) Clock (16) Door trim panel (13) Front bumper (5) Rear bumper (2) Brake pads (9) Tires (3) Shift knob (9) Pump (1) Car door (1) Instrument cluster (6) Wheel (2) Fuse box (41) Seat (3) Door lock (3) Side mirror (6) Warning light – error code (34) (58) Tire pressure warning light (24) Service warning light (101) Windshield wipers (17) Center console tunnel (1) EGR valve (1) Blower motor (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos