Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on a Dacia Sandero II

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: EGR valve

See other generations:
Video tutorial

Replacing the EGR valve on the Sandero II 1.5 dCi requires the removal of several components. Lift the car and place it on axle stands.

Disconnect the MAF sensor connector and remove the intake pipes. Unscrew the nut on the turbo air duct (10 mm socket) and remove the duct.

The EGR valve is secured with three screws (10 mm spanner). Disconnect the electrical connector and the coolant pipes (pressing the tabs).

If the valve is caked, use a release agent and a hammer with a piece of wood to rotate and free it. Also, remove the inlet duct of the valve. Clean the duct and install the new valve with the metal gasket (pay attention to the orientation).

You can find it on eBay with code 358779241169 for £84.05, with free delivery. Reconnect the pipes and the connector.

Refit the intake ducts and tighten everything.


Posted on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Dacia Sandero
How to Replace the Pollen Filter on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the pollen filter on a Dacia Sandero? Follow these steps for the replacement. Use a plastic lever to detach the trim located at the bo…
How to Disable the "Start/Stop" on a Dacia Sandero
How to Disable the "Start/Stop" on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this brief video tutorial, see the steps necessary to activate or deactivate the start/stop feature on a second-generation Dacia Sandero, produced…
How to Remove and Replace the Engine Air Filter on a Dacia Sandero
How to Remove and Replace the Engine Air Filter on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Learn how to remove and replace the engine air filter on a Dacia Sandero: Open the car door, pull up the engine compartment release lever located at …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos