Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the "Start/Stop" on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Checks and maintenance

In this brief video tutorial, see the steps necessary to activate or deactivate the start/stop feature on a second-generation Dacia Sandero, produced from 2012 to 2020. To perform this operation, simply press the appropriate button located on the centre console, under the handbrake as shown in the video. The illuminated or unlit button will indicate its activation or deactivation. In some models, this operation can also be performed through the onboard computer. If in doubt, consult the user manual for your specific Dacia Sandero model for more detailed instructions.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) To permanently disable the Start/Stop system on a Dacia Sandero, you need to work in the engine bay. Open the bonnet and locate the IBS sensor connec…
Dacia Sandero (2021-2026 / MK 3) On the Dacia Sandero 2024, the Start/Stop function can be disabled either temporarily or permanently. For the first procedure: with the engine runnin…
Dacia Sandero (2021-2026 / MK 3) In this video we can see how to permanently deactivate the start & stop system on the Dacia Sandero Stepway. If we wanted to deactivate it only for t…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos