Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Engine Air Filter on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

Learn how to remove and replace the engine air filter on a Dacia Sandero: Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it with the prop. Remove the engine soundproofing panel, then open the air kit (unscrew the securing screws), remove the cap from the filter box, and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the edges). Finally, reassemble the filter box cap and tighten the screws.

Close the front bonnet after maintenance.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Dacia Sandero
How to Replace the Air Filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is likely time to replace the air filter. This guide will explain t…
How to Replace the Engine Air Filter on a Dacia Sandero
How to Replace the Engine Air Filter on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the engine air filter on a Dacia Sandero? Follow this procedure: open the car door, pull up the engine compartment release lever locat…
How to replace the air filter in the Dacia Sandero 2?
How to replace the air filter in the Dacia Sandero 2?
Dacia Sandero (2012-2020 / B8) The air filter for the Dacia Sandero 2 costs around £10, so by replacing it yourself instead of going to a garage, you can save significantly on labo…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos