Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the MAF sensor of the Dacia Duster 1.5 DCi

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: MAF sensor

See other generations:
Video tutorial

In this video, we will see how to clean the MAF sensor inside the 1.5 DCi engine of a Dacia Duster MK2. The sensor is located on the air intake pipe, behind the filter box, in a very convenient and visible position. It will be easy to disconnect the electrical connector and remove the fixing clamp, using a flat-head screwdriver in both cases.

With a cross-head screwdriver, we will remove the device for cleaning. We will perform this operation with a specific sprayer, such as Liqui Moly with code 146384678023 on E-bay, priced at 16.89 euros, including delivery costs.

Spray it well. Let it dry perfectly in the air and then reposition it in its place.

Operation completed.


Posted on 24 August 2025 by ScegliAuto


Related tutorials

How to change the MAF sensor of a 2015 Dacia Duster.
How to change the MAF sensor of a 2015 Dacia Duster.
Dacia Duster (2010-2017 / MK 1, HS) Let's see how to replace the MAF (Mass Air Flow) sensor on a 2015 Dacia Duster: this sensor, as the name suggests, measures the mass of air entering …
Replacing the Timing Belt on the Dacia Duster 1.5 dCi
Replacing the Timing Belt on the Dacia Duster 1.5 dCi
Dacia Duster (2010-2017 / MK 1, HS) Today we will see the instructions that will allow us to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, open the vehicle's bo…
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Dacia Duster (2010-2017 / MK 1, HS) Here are the main steps to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, raise the vehicle and remove the front right wheel …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos