|
Do it yourself
| |||
| ||||
What is the purpose of the strange seatbelt in the second row of the Dacia Jogger?
Model: Dacia Jogger
MK 1
- Years:
2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
Dacia Jogger owners may have wondered about the strange seatbelt located on the roof of the vehicle, in the second row, where the passengers sit. This is especially true since there are two standard seatbelts on either side of the rear bench that should be fastened normally for the rear passengers, near the windows. The roof seatbelt is for the central seat: as shown in the video, it must be attached at the first central point, and then the second buckle at the second point of the central seat, achieving the necessary correct triangulation.
Updated on 11 November 2026 by ScegliAuto
Related tutorials
Dacia Jogger
(2021-2026 /
MK 1)
If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
Dacia Jogger
(2021-2026 /
MK 1)
The instructions in this guide will show you how to reset the tyre pressure warning on the Dacia Jogger. First, get in the vehicle and turn on the ig…
Dacia Jogger
(2021-2026 /
MK 1)
In order to replace the cabin filter of the Dacia Jogger, you need to completely remove the trim panel located on the side of the footwell from the f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to Replace the Front Headlamp Bulb in a Kia Stonic?
Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |