Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the armrest of the Dacia Sandero 2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Checks and maintenance

Dismantling the armrest of your second-generation Dacia Sandero by yourself is really simple. To complete the operation, just follow the procedure described in the following guide. First of all, enter the cabin and then focus your attention on the armrest and locate the button that is underneath it. Once you have found it, press it and simultaneously pull the armrest sideways until it is completely detached. At this point, the procedure is successfully completed, but you can proceed with the installation of a new armrest.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) To replace the armrest located on the side of the seat in the Dacia Sandero, grasp the old armrest and pull it outward to remove it from its housing.…
Dacia Sandero (2008-2012 / BS) Learn how to install the armrest storage compartment in the central tunnel trim of a Dacia Sandero. Position the armrest horizontally, then, using a …
Dacia Sandero (2012-2020 / B8) In order to install the armrest of the Dacia Sandero, you must first remove the trim around the handbrake lever: to do this, you will need to loosen …

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos