Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the armrest in the Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the armrest located on the side of the seat in the Dacia Sandero, grasp the old armrest and pull it outward to remove it from its housing. Once the old armrest is detached from the side of the seat, insert the new one, ensuring that the corresponding fixing pins fit into their respective housings.

Then, push the armrest inward to secure it: at this point, check that it can move without any issues.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2012-2020 / B8) Dismantling the armrest of your second-generation Dacia Sandero by yourself is really simple. To complete the operation, just follow the procedure de…
Dacia Sandero (2012-2020 / B8) To install the armrest on a Dacia Sandero, first remove the trim around the handbrake lever: to do this, loosen the screw located at the back of the …
Dacia Sandero (2008-2012 / BS) Learn how to install the armrest storage compartment in the central tunnel trim of a Dacia Sandero. Position the armrest horizontally, then, using a …

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos