Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Bulbs on a Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Headlight

The video shows that changing the bulbs on the Dacia Jogger is quite complicated due to tight spaces and awkward positioning. Open the bonnet, locate the back of the headlamp, and immediately encounter the first problem, as the protective caps are loose and easy to lose; they can fall and end up who knows where in the engine bay. On the bulb holder, there are two levers that need to be disengaged by prying: the bulb pulls outwards. The new bulb has a reference tab that must align with the notch: the tab should be positioned upwards (i.e., towards the outside). Push until it clicks (it may slightly retract due to the spring, which is normal). The cap must be refitted to the outside, not inside, and should apply pressure to seal. Additionally, there are cables and pipes positioned in a way that makes the operation really complicated; the spaces are very tight and visibility is poor.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …
Dacia Jogger (2021-2026 / MK 1) In order to replace the cabin filter of the Dacia Jogger, you need to completely remove the trim panel located on the side of the footwell from the f…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos