Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Dacia Logan

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Door trim panel

Before starting, open the rear door of your Dacia Logan. Begin by unscrewing and removing the Torx screws that secure the door panel to the door itself. Next, remove the clip that secures the window winder, using a medium-sized flat screwdriver if needed. Once you have removed the retaining clip, you can extract the winder by simply pulling it out. At this point, to remove the panel, you only need to disengage the internal clips that hold it in place, using a thin but sturdy tool and applying leverage. Once you have disengaged the clips, you can remove the door panel, successfully completing the disassembly.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear door panel of the Dacia Logan
Disassembly of the rear door panel of the Dacia Logan
Dacia Logan (2004-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and remove the rear door panel of the Dacia Logan, in simple steps. First, we op…
How to disassemble the front door panel of the Dacia Logan
How to disassemble the front door panel of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) In these short and simple steps, we will see how to disassemble the front door panel of the Dacia Logan. First, open the front door of the car and st…
Removing the Door Panel of a Dacia Logan
Removing the Door Panel of a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Today, in this video tutorial, see how to remove the door panel of a first series Dacia Logan. First, open the door and start by removing the window …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos