Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Dacia Jogger, first inflate the tyres to the pressure values indicated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, turn on the instrument panel. Navigate through the menu using the arrow buttons on the right side of the steering wheel to find the option indicating tyre pressure: at this point, press and hold the OK button until the tyre pressure warning light resets.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Dacia Jogger?
How to reset the tyre pressure warning light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) To reset the tyre pressure warning light on the Dacia Jogger, inflate the tyres to the correct pressure: this value is stated on the sticker attached…
How do you reset the tire pressure warning light on the Dacia Jogger?
How do you reset the tire pressure warning light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) It will be possible to reset the tire pressure warning light of the Dacia Jogger by inflating the tires until they reach the recommended pressure val…
How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
Dacia Jogger (2021-2026 / MK 1) Below are the necessary steps to reset the tyre pressure warning light (TPMS) on the Dacia Jogger, as well as on the Sandero and Duster; before reset…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos