Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Spare Wheel on the Dacia Jogger

Model: Dacia Jogger MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Wheel

Video tutorial

In this video, we show where the spare wheel is located on the Dacia Jogger and how to access it. If you need to change the wheel, park in a safe, flat area and turn on the hazard lights after engaging the handbrake and putting the car in gear. To access the spare wheel, open the boot and retrieve the tools secured to the side wall of the boot.

Then lift the boot mat to access the screw that secures the spare wheel cradle; unscrew the bolt and detach the cradle from underneath using the handle, releasing the spare wheel. Loosen the bolts of the damaged wheel without removing them completely, then position the jack at the nearest support base to the affected wheel and raise the vehicle.

Completely unscrew the wheel bolts and remove the wheel. Position the spare wheel, tighten the bolts, and lower the vehicle.

Place the punctured wheel back in the cradle and re-tighten the screw in the opposite direction.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Where Is the OBD Port on the Dacia Jogger?
Where Is the OBD Port on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) In this new guide for all of you who own a Dacia Jogger, we will help you easily find the OBD port of the car so you can connect a diagnostic tool an…
Where is the OBD2 port located on the Dacia Jogger 2022
Where is the OBD2 port located on the Dacia Jogger 2022
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …
How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos