Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the decoration of the exterior handle of the Dacia

Model: Dacia Dacia Various
Part: Handle

The steps to disassemble the exterior handle decoration of Dacia Logan, Dacia Duster, and Dacia Sandero vehicles are simple and quick to perform independently, using a star screwdriver. To remove the handle, we need to lift it up and use the screwdriver to unscrew the two screws underneath it. Once the handle is removed, we can replace it, paint it a new color, and so on. The assembly of the handle follows the same procedure but in reverse. We place the handle on the exterior part and screw in the two screws, bringing the handle into position.

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Dacia Various In this video we can see how easy it is to remove the antenna from a Dacia car. After removing the actual antenna, which is simply unscrewed, we need…
Dacia Dacia Various To remove the timing belt on a Dacia, first access the engine bay and remove the plastic cover located on the side of the engine. This will allow acc…
Dacia Dacia Various The steps to reset the TPMS warning light related to tire pressure on Dacia vehicles are the same whether it is a Dacia Logan or a Dacia Jogger. The …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos