Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Handle in a Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Handle

See other generations:
Video tutorial

In this tutorial, you will see how to replace the interior handle in a Dacia Sandero, a very simple and quick operation. For this, you will need a Torx T27 screwdriver.

First, go inside the cabin, then locate the screw inside the handle in question and unscrew it. Once done, grasp the handle, pull it outward, and simultaneously rotate it counterclockwise to release the lock cable. At this point, connect the replacement part, position it in the housing, and tighten the fixing screw.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Inner Door Panel of a Dacia Sandero
How to Remove the Inner Door Panel of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) To remove the inner door panel of a Dacia Sandero, fully lower the window and switch off the vehicle. Remove the cover of the inner handle using a pl…
How to Replace the Rear Door Panel on a Dacia Sandero?
How to Replace the Rear Door Panel on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To replace the rear door panel on a Dacia Sandero, loosen the screws that secure the panel to its housing: these screws are located in the handle rec…
How to Remove the Door Panel of the Dacia Sandero?
How to Remove the Door Panel of the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To remove the door panel of the Dacia Sandero, loosen the corresponding fastening screws so that the panel can be completely freed from its housing: …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos