Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door handle on the Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Handle

Today we will explain how to replace the front door handle of the Dacia Jogger. To perform this operation, we need a 25mm Torx key, a flat-headed screwdriver, and a new handle. We open the door and remove the plastic clip covering the bolt. We insert the key into the side hole to unscrew the bolt inside. After removing the bolt, we pull the handle outwards to remove the plastic lock located at the lock; then we pull harder to remove the handle. We insert the new handle into the door; first hooking the left side. We insert the internal screw to be able to hook the handle using a 4mm 90° bent key. We screw the bolt and mount the cover clip.

Posted on 27 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
How to replace the battery of the Dacia Jogger key
How to replace the battery of the Dacia Jogger key
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and want to find out how to replace the car key battery, all you have to do is follow the steps described below. First, rem…
Where is the OBD2 port located on the Dacia Jogger 2022
Where is the OBD2 port located on the Dacia Jogger 2022
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos