Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Door trim panel

To remove the door panel of the Dacia Sandero, loosen the corresponding fastening screws so that the panel can be completely freed from its housing: the screws are located in the handle recess, near the window switch panel, and on the side of the panel. Once all screws are loosened, you can completely detach the panel from the door by disconnecting the internal connectors of the window switch panel; this way, you can position the new door panel, securing and connecting it properly.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Dacia Sandero?
How to Remove the Door Panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before you begin, open the door of your Dacia Sandero. Start by prising off and removing the window switch, simply by extracting the internal retaini…
How to Remove the Door Panel of a Dacia Sandero
How to Remove the Door Panel of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you can start, open the door of your Dacia Sandero. Begin by prising off and removing the window switch, simply removing the internal retainin…
How to Remove the Door Panel on a Dacia Sandero
How to Remove the Door Panel on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How do you remove the right rear door panel on a Dacia Sandero? Follow these steps. Before starting the disassembly, disconnect the battery terminals…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos