Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Door trim panel

How do you remove the right rear door panel on a Dacia Sandero? Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin disassembly: use a screwdriver to remove the screws securing the plastic panel, then use a lever to remove the window winder handle and detach all the plastic clips holding the door. Pull off the door panel by hand, disconnect any power connectors and release cables. Perform necessary maintenance inside the door.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Dacia Sandero?
How to Remove the Door Panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before you begin, open the door of your Dacia Sandero. Start by prising off and removing the window switch, simply by extracting the internal retaini…
How to Remove the Door Panel of a Dacia Sandero
How to Remove the Door Panel of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you can start, open the door of your Dacia Sandero. Begin by prising off and removing the window switch, simply removing the internal retainin…
How to Remove the Rear Door Panel in a Dacia Sandero
How to Remove the Rear Door Panel in a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you start, open the rear door of your Dacia Sandero. Begin by unscrewing and removing the screws that secure the door panel to the rear door i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos