Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

To change the battery on a first-generation Dacia Sandero, open the bonnet and locate the battery in the engine compartment. Remove any plastic covers to access the terminals.

First, loosen the negative terminal and disconnect it, then loosen and disconnect the positive terminal. Unscrew the bracket or support that secures the battery in its place.

Lift the battery out carefully. Place the new battery in the same housing and secure it with the bracket.

Connect the positive terminal first, then the negative terminal, ensuring they are tight. Close the bonnet and check that the vehicle starts correctly.


Posted on 19 March 2026 by ScegliAuto


Related tutorials

How to Change the Remote Battery of a Dacia Sandero
How to Change the Remote Battery of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) The tutorial here for changing the remote battery of a Dacia Sandero is also applicable to the Dacia Duster and all other cars with a similar remote …
How to Change the Key Fob Battery on a Dacia Sandero
How to Change the Key Fob Battery on a Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) To replace the battery in the key fob of a Dacia Sandero, take the fob and locate the back of the casing, then slide the front cover upwards to remov…
How to Replace the Battery in a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Remove the power battery from a Dacia Sandero. Do not worry, here’s how to proceed. Lift the engine bonnet (secure it with the prop rod), remove the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos