Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Tire pressure warning light

Below are the necessary steps to reset the tyre pressure warning light (TPMS) on the Dacia Jogger, as well as on the Sandero and Duster; before resetting the light, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the instrument panel; use the arrow controls on the steering wheel to scroll through the onboard computer options until you reach the tyre pressure section, as shown in the video. Finally, perform the reset to permanently clear the TPMS light!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
Dacia Jogger (2021-2026 / MK 1) To reset the tyre pressure warning light on the Dacia Jogger, first inflate the tyres to the pressure values indicated on the sticker attached to the…
How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
How to Reset the Tyre Pressure Warning Light on the Dacia Jogger
Dacia Jogger (2021-2026 / MK 1) The instructions in this guide will show you how to reset the tyre pressure warning on the Dacia Jogger. First, get in the vehicle and turn on the ig…
How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos