Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Datsun on-DO?

Model: Datsun On Do BD0 - Years 2014-2020
Part: Cabin air filter

As shown in this tutorial, replacing the cabin filter in the Datsun on-DO is a very simple and quick task. First, open the hood, then remove the retaining clips of the upper protective plate. Next, using a Phillips screwdriver, unscrew the two screws of the filter cover and pull the filter out of the housing. Finally, install the replacement by following the reverse procedure, ensuring it is positioned correctly and that the housing is completely clean of any debris and dirt.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Datsun on-DO?
How to replace the air filter in the Datsun on-DO?
Datsun On Do (2014-2020 / BD0) As shown in this tutorial, replacing the air filter in the Datsun on-DO is an extremely simple and quick operation. First, ensure that the engine is …
Guide to Changing Engine Oil and Oil Filter in Datsun On Do
Guide to Changing Engine Oil and Oil Filter in Datsun On Do
Datsun On Do (2014-2020 / BD0) Let's go through the necessary guide to perform routine maintenance by changing the engine oil and oil filter in the Datsun On Do. First, lift the ve…
How to Replace the Tail Light Bulbs on a Datsun on-DO?
How to Replace the Tail Light Bulbs on a Datsun on-DO?
Datsun On Do (2014-2020 / BD0) As seen in this tutorial, replacing the tail light bulbs on the Datsun on-DO is an extremely simple and quick task. Before proceeding, ensure the key…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos