Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Rear Spoiler on the Datsun Redi Go

Model: Datsun Redi Go MK 1 - Years 2016-2023
Part: Body

If you intend to customize your vehicle by installing an additional spoiler at the top of the hatch, follow the instructions below and refer to the video. Purchase an aftermarket spoiler compatible with the vehicle; these accessories usually come with the third brake light and adhesive for mounting. Take the spoiler, position it, and remove the protective film from the adhesive. Apply pressure with your hands to optimize adhesion, then open the hatch and tighten the mounting screw for the brackets at the ends. Finally, connect the power connector for the third brake light, and you're done.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Lights on a Datsun Redi Go Mk1
How to Replace the Tail Lights on a Datsun Redi Go Mk1
Datsun Redi Go (2016-2023 / MK 1) This guide shows how to remove the tail light from the Datsun Redi Go. First, secure the vehicle and open the trunk. Next, remove the two mounting bo…
How to Remove the Rear Headlight on a Datsun redi-GO?
How to Remove the Rear Headlight on a Datsun redi-GO?
Datsun Redi Go (2016-2023 / MK 1) As seen in this tutorial, removing the rear headlight on a Datsun redi-GO to replace a burnt-out bulb is a very simple and quick task. First, ensure …
How to Remove the Stock Radio from the Datsun Redi Go
How to Remove the Stock Radio from the Datsun Redi Go
Datsun Redi Go (2016-2023 / MK 1) Discover the main instructions that will allow you to remove and replace the stock radio of the Datsun Redi Go. First, get inside the vehicle and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos