Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Derbi Boulevard?

Model: Derbi Boulevard
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Derbi Boulevard, you will need to loosen the screws that secure the exhaust end can to its housing: this is located near the rear wheel on the right side of the bike. Once the securing screws have been loosened, you can widen the connecting clamp between the exhaust and the exhaust manifold: at this point, you can insert the new exhaust end can and secure it with the appropriate screws.

After installation, check that everything is functioning correctly.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How do you replace the spark plug on the Derbi Boulevard?
How do you replace the spark plug on the Derbi Boulevard?
Boulevard To replace the spark plug installed on the Derbi Boulevard, you need to completely remove the panel located at the bottom of the under-seat compartme…
How to Clean and Overhaul the Carburettor on a Derbi Boulevard
How to Clean and Overhaul the Carburettor on a Derbi Boulevard
Boulevard Here are the instructions to dismantle and overhaul the carburettor on the Derbi Boulevard scooter. First, place your scooter on the centre stand and…
How do you replace the exhaust pipe of the Suzuki Boulevard C50T?
How do you replace the exhaust pipe of the Suzuki Boulevard C50T?
Boulevard In order to replace the exhaust pipe of the Suzuki Boulevard C50T, you need to loosen the screws that fix the exhaust terminal to its housing on the …

How to Raise and Lower the Screen on the Yamaha X-MAX 125

In this video, you can see how to raise or lower the front screen of the Yamaha X-MAX 125 scooter: note that there are two visible screws on the transparent part that you need to unscrew. Then, remove the two plastic seals that protect the other screws, which you will find underneath them. Unscrew these as well and then take off the transparent screen. Remove the metal screws underneath and reposition the transparent part according to your needs; there are four screws on each side that allow for a certain range of movement, both up and down. Refit the plastic seal, securing it with its fixing screw, and the job is complete.

Watch the video!


by ScegliAuto

More videos